Langyou Chemical
SUPPLEMENTS
Anionic Polyacrylamide Msds
Anionic Polyacrylamide Safety Technical Manual
1. Chemicals and Corporate Identification
Chemical Chinese Name: Anionic Polyacrylamide
Chemical English Name: Anionic Polyacrylamide
Company Name: [Specific Enterprise Name]
Address: [Detailed Address]
Postal Code: [Specific Zip Code]
Fax: [Fax Number]
Contact Number: [Telephone Number]
II. Composition/Composition Information
Main Ingredient: Anionic Polyacrylamide
CAS Number: [Specific CAS Number]
Molecular Formula: [Specific Molecular Formula]
Molecular Weight: [Specific Molecular Weight]
III. Dangerous Sex Overview
Hazard Category: [If there is no special hazard category, please indicate "no information"]
Intrusion route: inhalation, ingestion, percutaneous absorption.
Health Hazards: May be harmful to the body after inhalation, ingestion or skin absorption. Irritating to the eyes, skin and respiratory tract.
Environmental Hazards: May be hazardous to the environment, special attention should be paid to water bodies.
Explosion Hazard: This product is non-flammable and irritating.
IV. First Aid Measures
Skin Contact: Immediately remove contaminated clothing and rinse with plenty of flowing water for at least 15 minutes. Seek medical attention.
Eye Contact: Immediately lift the eyelids and rinse thoroughly with plenty of flowing water or normal saline for at least 15 minutes. Seek medical attention.
Inhalation: Quickly remove from the scene to a fresh place of air. Keep the respiratory tract unobstructed. If breathing difficulties, give oxygen. If breathing stops, perform artificial respiration immediately. Seek medical attention.
Ingestion: Drink enough warm water to induce vomiting. Seek medical attention.
5. Firefighting measures
Hazardous characteristics: Combustible in case of open fire and hot topic. Its powder and air can form an explosive mixture. When it reaches a certain concentration, it will explode in case of Mars. The hot topic decomposes and emits toxic gases.
Harmful combustion products: carbon monoxide, carbon dioxide, nitrogen oxides.
Fire extinguishing method: Move the container from the fire field to an open place as much as possible. Spray water to keep the container in the fire field cool until the fire is extinguished. Fire extinguishing agent: mist water, foam, dry powder, carbon dioxide, sand.
VI. Emergency treatment for leaks
Emergency treatment: Isolate the leaked contaminated area and restrict access. It is recommended that emergency personnel wear dust masks (full face masks) and gas suits. Avoid dust, sweep it up carefully, and transfer it to a safe place in a bag. If there is a large amount of leakage, cover it with plastic sheets and canvas. Collect and recycle it or transport it to a waste treatment site for disposal.
VII. Operation disposal and storage
Operation precautions: closed operation, local ventilation. Operators must undergo special training and strictly follow the operating procedures. It is recommended that operators wear self-priming filter dust masks, chemical safety protective glasses, anti-poison infiltration overalls, and rubber gloves. Avoid generating dust. Avoid contact with oxidants, acids and alkalis. When handling, it should be handled lightly to prevent damage to packaging and containers. Equipped with emergency treatment equipment for leaks. Harmful substances may remain in emptied containers.
Storage precautions: Store in a cool and ventilated warehouse. Keep away from fire and heat sources. It should be stored separately from oxidants, acids and alkalis, and should not be mixed. The storage area should be equipped with suitable materials to contain leaks.
8. Contact control/personal protection
Occupational exposure limits: no data.
Monitoring methods: no data.
Engineering control: closed operation, local exhaust.
Respiratory system protection: When the dust concentration in the air exceeds the standard, a self-priming filter dust mask must be worn. In emergency rescue or evacuation, an air respirator should be worn.
Eye protection: Wear chemical safety glasses.
Body protection: Wear anti-poison infiltration overalls.
Hand protection: Wear rubber gloves.
Other protection: After work, shower and change clothes. Maintain good hygiene habits.
IX. Physical and chemical properties
Appearance and traits: white powder or granules.
pH value: [Specific pH range]
Melting point (℃): [Specific melting point]
Boiling point (℃): [Specific boiling point]
Relative density (water = 1): [Specific relative density]
Relative vapor density (air = 1): No data
Saturated vapor pressure (kPa): No data
Heat of combustion (kJ/mol): No data
Critical temperature (℃): No data
Critical pressure (MPa): No data
Logarithmic value of octanol/water partition coefficient: No data
Flash point (℃): No data
Ignition temperature (℃): No data
Upper limit of explosion [% (V/V) ) ]: No data
Lower explosion limit [% (V/V) ]: No data
Solubility: Easily soluble in water.
Main uses: Widely used in petroleum extraction, papermaking, water treatment, textile and other industries.
Ten. Stability and reactivity
Stability: Stable.
Prohibited ingredients: strong oxidant, strong acid, strong alkali.
Conditions to avoid contact: high temperature, open flame.
Polymerization hazard: no polymerization.
Decomposition products: carbon monoxide, carbon dioxide, nitrogen oxides.
Eleven. Toxicological data
Acute toxicity: LD50: [specific value] mg/kg (rat oral); LC50: no data.
Irritation: Rabbit percutaneous: [specific value] mg/24 hours, moderate irritation. Rabbit percutaneous: [specific value] mg, severe irritation.
Subacute and chronic toxicity: no data.
Mutagenicity: no data.
Teratogenicity: no data.
Carcinogenicity: No data.
XII. Ecological data
Ecotoxicity: No data.
Biodegradability: No data.
Non-biodegradability: No data.
Bioaccumulation or bioaccumulation: No data.
Other harmful effects: The substance may be harmful to the environment, and special attention should be paid to water bodies.
XIII. Waste disposal
Nature of waste: Hazardous waste.
Waste disposal method: Dispose of it by controlled incineration. The nitrogen oxides discharged from the incinerator are removed through the scrubber.
Precautions for waste: Refer to relevant national and local regulations before disposal. Return the empty container to the manufacturer or bury it in the specified place.
XIV. Shipping Information
Dangerous Goods Number: No Information.
UN Number: No Information.
Packing Mark: No Information.
Packing Category: No Information.
Packing Method: Plastic bag or two-layer kraft paper bag with full or middle opening steel drum; Plastic bag or two-layer kraft paper bag with outer ordinary wooden box; Threaded mouth glass bottle, iron-capped glass bottle, plastic bottle or metal drum (tank) with outer ordinary wooden box; Threaded mouth glass bottle, plastic bottle or tin-plated sheet steel drum (tank) with outer baseplate glove box, fiberboard box or plywood box.
Precautions for transportation: The packaging should be complete at the time of departure, and the loading should be secure. During transportation, ensure that the container does not leak, collapse, fall, or be damaged. Mixed transportation with oxidants, acids, alkalis, and edible chemicals is strictly prohibited. During transportation, it should be protected from exposure to the sun, rain, and high temperature. The vehicle should be thoroughly cleaned after transportation.
15. Regulatory Information
Regulatory Information: Regulations on the Safety Management of Chemical Dangerous Substances (issued by the State Council on February 17, 1987), Implementing Regulations on the Safety Management of Chemical Dangerous Substances (Hua Laofa [1992] No. 677), Regulations on the Safe Use of Chemicals in the Workplace ([1996] Labor Ministry No. 423) and other regulations have made corresponding regulations on the safe use, production, storage, transportation, loading and unloading of chemical dangerous goods.
The above content can be adjusted and improved according to the actual situation to ensure that it is consistent with the actual characteristics of anionic polyacrylamide products.
1. Chemicals and Corporate Identification
Chemical Chinese Name: Anionic Polyacrylamide
Chemical English Name: Anionic Polyacrylamide
Company Name: [Specific Enterprise Name]
Address: [Detailed Address]
Postal Code: [Specific Zip Code]
Fax: [Fax Number]
Contact Number: [Telephone Number]
II. Composition/Composition Information
Main Ingredient: Anionic Polyacrylamide
CAS Number: [Specific CAS Number]
Molecular Formula: [Specific Molecular Formula]
Molecular Weight: [Specific Molecular Weight]
III. Dangerous Sex Overview
Hazard Category: [If there is no special hazard category, please indicate "no information"]
Intrusion route: inhalation, ingestion, percutaneous absorption.
Health Hazards: May be harmful to the body after inhalation, ingestion or skin absorption. Irritating to the eyes, skin and respiratory tract.
Environmental Hazards: May be hazardous to the environment, special attention should be paid to water bodies.
Explosion Hazard: This product is non-flammable and irritating.
IV. First Aid Measures
Skin Contact: Immediately remove contaminated clothing and rinse with plenty of flowing water for at least 15 minutes. Seek medical attention.
Eye Contact: Immediately lift the eyelids and rinse thoroughly with plenty of flowing water or normal saline for at least 15 minutes. Seek medical attention.
Inhalation: Quickly remove from the scene to a fresh place of air. Keep the respiratory tract unobstructed. If breathing difficulties, give oxygen. If breathing stops, perform artificial respiration immediately. Seek medical attention.
Ingestion: Drink enough warm water to induce vomiting. Seek medical attention.
5. Firefighting measures
Hazardous characteristics: Combustible in case of open fire and hot topic. Its powder and air can form an explosive mixture. When it reaches a certain concentration, it will explode in case of Mars. The hot topic decomposes and emits toxic gases.
Harmful combustion products: carbon monoxide, carbon dioxide, nitrogen oxides.
Fire extinguishing method: Move the container from the fire field to an open place as much as possible. Spray water to keep the container in the fire field cool until the fire is extinguished. Fire extinguishing agent: mist water, foam, dry powder, carbon dioxide, sand.
VI. Emergency treatment for leaks
Emergency treatment: Isolate the leaked contaminated area and restrict access. It is recommended that emergency personnel wear dust masks (full face masks) and gas suits. Avoid dust, sweep it up carefully, and transfer it to a safe place in a bag. If there is a large amount of leakage, cover it with plastic sheets and canvas. Collect and recycle it or transport it to a waste treatment site for disposal.
VII. Operation disposal and storage
Operation precautions: closed operation, local ventilation. Operators must undergo special training and strictly follow the operating procedures. It is recommended that operators wear self-priming filter dust masks, chemical safety protective glasses, anti-poison infiltration overalls, and rubber gloves. Avoid generating dust. Avoid contact with oxidants, acids and alkalis. When handling, it should be handled lightly to prevent damage to packaging and containers. Equipped with emergency treatment equipment for leaks. Harmful substances may remain in emptied containers.
Storage precautions: Store in a cool and ventilated warehouse. Keep away from fire and heat sources. It should be stored separately from oxidants, acids and alkalis, and should not be mixed. The storage area should be equipped with suitable materials to contain leaks.
8. Contact control/personal protection
Occupational exposure limits: no data.
Monitoring methods: no data.
Engineering control: closed operation, local exhaust.
Respiratory system protection: When the dust concentration in the air exceeds the standard, a self-priming filter dust mask must be worn. In emergency rescue or evacuation, an air respirator should be worn.
Eye protection: Wear chemical safety glasses.
Body protection: Wear anti-poison infiltration overalls.
Hand protection: Wear rubber gloves.
Other protection: After work, shower and change clothes. Maintain good hygiene habits.
IX. Physical and chemical properties
Appearance and traits: white powder or granules.
pH value: [Specific pH range]
Melting point (℃): [Specific melting point]
Boiling point (℃): [Specific boiling point]
Relative density (water = 1): [Specific relative density]
Relative vapor density (air = 1): No data
Saturated vapor pressure (kPa): No data
Heat of combustion (kJ/mol): No data
Critical temperature (℃): No data
Critical pressure (MPa): No data
Logarithmic value of octanol/water partition coefficient: No data
Flash point (℃): No data
Ignition temperature (℃): No data
Upper limit of explosion [% (V/V) ) ]: No data
Lower explosion limit [% (V/V) ]: No data
Solubility: Easily soluble in water.
Main uses: Widely used in petroleum extraction, papermaking, water treatment, textile and other industries.
Ten. Stability and reactivity
Stability: Stable.
Prohibited ingredients: strong oxidant, strong acid, strong alkali.
Conditions to avoid contact: high temperature, open flame.
Polymerization hazard: no polymerization.
Decomposition products: carbon monoxide, carbon dioxide, nitrogen oxides.
Eleven. Toxicological data
Acute toxicity: LD50: [specific value] mg/kg (rat oral); LC50: no data.
Irritation: Rabbit percutaneous: [specific value] mg/24 hours, moderate irritation. Rabbit percutaneous: [specific value] mg, severe irritation.
Subacute and chronic toxicity: no data.
Mutagenicity: no data.
Teratogenicity: no data.
Carcinogenicity: No data.
XII. Ecological data
Ecotoxicity: No data.
Biodegradability: No data.
Non-biodegradability: No data.
Bioaccumulation or bioaccumulation: No data.
Other harmful effects: The substance may be harmful to the environment, and special attention should be paid to water bodies.
XIII. Waste disposal
Nature of waste: Hazardous waste.
Waste disposal method: Dispose of it by controlled incineration. The nitrogen oxides discharged from the incinerator are removed through the scrubber.
Precautions for waste: Refer to relevant national and local regulations before disposal. Return the empty container to the manufacturer or bury it in the specified place.
XIV. Shipping Information
Dangerous Goods Number: No Information.
UN Number: No Information.
Packing Mark: No Information.
Packing Category: No Information.
Packing Method: Plastic bag or two-layer kraft paper bag with full or middle opening steel drum; Plastic bag or two-layer kraft paper bag with outer ordinary wooden box; Threaded mouth glass bottle, iron-capped glass bottle, plastic bottle or metal drum (tank) with outer ordinary wooden box; Threaded mouth glass bottle, plastic bottle or tin-plated sheet steel drum (tank) with outer baseplate glove box, fiberboard box or plywood box.
Precautions for transportation: The packaging should be complete at the time of departure, and the loading should be secure. During transportation, ensure that the container does not leak, collapse, fall, or be damaged. Mixed transportation with oxidants, acids, alkalis, and edible chemicals is strictly prohibited. During transportation, it should be protected from exposure to the sun, rain, and high temperature. The vehicle should be thoroughly cleaned after transportation.
15. Regulatory Information
Regulatory Information: Regulations on the Safety Management of Chemical Dangerous Substances (issued by the State Council on February 17, 1987), Implementing Regulations on the Safety Management of Chemical Dangerous Substances (Hua Laofa [1992] No. 677), Regulations on the Safe Use of Chemicals in the Workplace ([1996] Labor Ministry No. 423) and other regulations have made corresponding regulations on the safe use, production, storage, transportation, loading and unloading of chemical dangerous goods.
The above content can be adjusted and improved according to the actual situation to ensure that it is consistent with the actual characteristics of anionic polyacrylamide products.
Scan to WhatsApp
