Langyou Chemical

SUPPLEMENTS
  • Home
  • Iron Powder Removal
  • Iron Powder Removal

Iron Powder Removal

The method of removing iron
The ancient smelter, every time he encountered iron filings, he was quite trapped. Although the iron filings are small, they are mixed with all kinds of materials, often damage their quality and disorderly shape, so the removal of iron is very important.

The method includes those who use magnets to attract iron, which are placed on the side of the debris, and the iron filings are like the mother of the child, and they are attached one after another. The smelter holds the magnet slowly, and the iron filings gradually gather, so that they do not fall away. This method is convenient, but the fine iron filings, or if they are not caught, often need to be repeated before they can be cleaned.

There are also those who use water to scavenge. Dump the debris in the water and stir it. The iron filings are heavy in quality and sink at the bottom of the water, and the remnants may float or hang. Slowly remove the water, leaving the iron filings at the bottom. However, the method of water washing, when encountering other things that are also heavy and insoluble in water, is easy to mix and difficult to distinguish, and must be screened in detail.

There are also those who use sieving to make a fine sieve, and the size is suitable for iron filings. Sieve the debris, iron filings stagnate on the screen, and the remnants fall. However, the sieve hole is easy to be stuffed with iron filings, and it needs to be cleaned frequently when used to ensure smoothness.

All kinds of methods for removing iron have advantages and disadvantages. Metallurgical workers should choose their methods and apply their techniques according to the nature of sundries and the amount of iron filings, so that the iron filings can be removed and the materials can be put to good use.